Non contractual picture of the frame and beveledNon contractual picture of the frame
Guaranteed shipping
Using specialist couriers
Secure payment
with Paypal or wire transfer
Free returns
Up to 14 days on prints only
serie 1
serie 2
serie 3
serie 4
serie 5
serie 6
serie 7
serie 8
Guaranteed shipping
Using specialist couriers
Secure payment
with Paypal or wire transfer
Free returns
Up to 14 days on prints only
Hand-made frames
By craftsmen
Limited edition
The print is placed in a black wooden frame and protected by a glass plate.
A custom beveled passe-partout keeps the photograph from being in contact with the frame. Thre is no passe-partout for the art pieces > 50cm.
The print is placed in a black wooden frame and protected by a glass plate.
A custom beveled passe-partout keeps the photograph from being in contact with the frame. Thre is no passe-partout for the art pieces > 50cm.
The print is permanently glued to a 1-mm thick aluminium plate. A 3-mm transparent glossy plexiglas plate is added in front of the photograph.
A 20-mm thick steel mount is glued to the back of the photograph. This system allows for great rigidity and a hanging slightly away from the wall.
Plexiglas increases contrast and colors and gives the print extra depth.
The print is permanently glued on an aluminium plate.
A board attached to the back of the photograph allows for a custom-made stick to run around it at a fixed distance, creating a gap between the print and the frame.
The print is placed in a black wooden frame and protected by a glass plate.
A custom beveled passe-partout keeps the photograph from being in contact with the frame. Thre is no passe-partout for the art pieces > 50cm.
The print is permanently glued to a 2-mm thick dibond plate.
Dibond is a composite material composed of a black polyethylene plate in between two plates of white glossed aluminum.
A 20-mm thick steel mount is glued to the back of the photograph. This system allows for great rigidity and a hanging slightly away from the wall.
The print is permanently glued to a 2-mm thick dibond plate.
Dibond is a composite material composed of a black polyethylene plate in between two plates of white glossed aluminum.
A 20-mm thick steel mount is glued to the back of the photograph. This system allows for great rigidity and a hanging slightly away from the wall.
The print is permanently glued to a 1-mm thick aluminium plate. A 3-mm transparent glossy plexiglas plate is added in front of the photograph.
A 20-mm thick steel mount is glued to the back of the photograph. This system allows for great rigidity and a hanging slightly away from the wall.
Plexiglas increases contrast and colors and gives the print extra depth.
The print is permanently glued on an aluminium plate.
A board attached to the back of the photograph allows for a custom-made stick to run around it at a fixed distance, creating a gap between the print and the frame.
The print is placed in a black wooden frame and protected by a glass plate.
A custom beveled passe-partout keeps the photograph from being in contact with the frame. Thre is no passe-partout for the art pieces > 50cm.
