Non contractual picture of the frame and beveledNon contractual picture of the frame
Seen from the front or seen from the back, it is undeniable that Catwoman is always pleasant to watch. For his part Marc Ninghetto shows us here from behind in his superhero outfit. Standing up at the corner of a room as a victim of punishment, nobody will not go to console this sublime catwoman
The print is placed in a black wooden frame and protected by a glass plate.
A custom beveled passe-partout keeps the photograph from being in contact with the frame. Thre is no passe-partout for the art pieces > 50cm.
The print is placed in a black wooden frame and protected by a glass plate.
A custom beveled passe-partout keeps the photograph from being in contact with the frame. Thre is no passe-partout for the art pieces > 50cm.
The print is permanently glued to a 1-mm thick aluminium plate. A 3-mm transparent glossy plexiglas plate is added in front of the photograph.
A 20-mm thick steel mount is glued to the back of the photograph. This system allows for great rigidity and a hanging slightly away from the wall.
Plexiglas increases contrast and colors and gives the print extra depth.
The print is permanently glued on an aluminium plate.
A board attached to the back of the photograph allows for a custom-made stick to run around it at a fixed distance, creating a gap between the print and the frame.
The print is permanently glued to a 2-mm thick dibond plate.
Dibond is a composite material composed of a black polyethylene plate in between two plates of white glossed aluminum.
A 20-mm thick steel mount is glued to the back of the photograph. This system allows for great rigidity and a hanging slightly away from the wall.
The print is placed in a black wooden frame and protected by a glass plate.
A custom beveled passe-partout keeps the photograph from being in contact with the frame. Thre is no passe-partout for the art pieces > 50cm.