Non contractual picture of the frame and beveledNon contractual picture of the frame
Here, Pete Ware makes Harley Quinn speak in an original way. For this, he does not use a bubble or phylactery, but rather the character itself. The text is written directly on the black and red suit of this ally of the Joker proudly carrying his big hammer. It says "Boss likes me to wear a smile to work". Yes, when working with the Joker, laughing and smiling are mandatory.
The print is placed in a black wooden frame and protected by a glass plate.
A custom beveled passe-partout keeps the photograph from being in contact with the frame. Thre is no passe-partout for the art pieces > 50cm.
The print is placed in a black wooden frame and protected by a glass plate.
A custom beveled passe-partout keeps the photograph from being in contact with the frame. Thre is no passe-partout for the art pieces > 50cm.
The print is placed in a black wooden frame and protected by a glass plate.
A custom beveled passe-partout keeps the photograph from being in contact with the frame. Thre is no passe-partout for the art pieces > 50cm.
The print is permanently glued to a 2-mm thick dibond plate.
Dibond is a composite material composed of a black polyethylene plate in between two plates of white glossed aluminum.
A 20-mm thick steel mount is glued to the back of the photograph. This system allows for great rigidity and a hanging slightly away from the wall.
The print is permanently glued to a 1-mm thick aluminium plate. A 3-mm transparent glossy plexiglas plate is added in front of the photograph.
A 20-mm thick steel mount is glued to the back of the photograph. This system allows for great rigidity and a hanging slightly away from the wall.
Plexiglas increases contrast and colors and gives the print extra depth.
The print is permanently glued on an aluminium plate.
A board attached to the back of the photograph allows for a custom-made stick to run around it at a fixed distance, creating a gap between the print and the frame.
The print is placed in a black wooden frame and protected by a glass plate.
A custom beveled passe-partout keeps the photograph from being in contact with the frame. Thre is no passe-partout for the art pieces > 50cm.
The print is permanently glued to a 2-mm thick dibond plate.
Dibond is a composite material composed of a black polyethylene plate in between two plates of white glossed aluminum.
A 20-mm thick steel mount is glued to the back of the photograph. This system allows for great rigidity and a hanging slightly away from the wall.
The print is permanently glued to a 1-mm thick aluminium plate. A 3-mm transparent glossy plexiglas plate is added in front of the photograph.
A 20-mm thick steel mount is glued to the back of the photograph. This system allows for great rigidity and a hanging slightly away from the wall.
Plexiglas increases contrast and colors and gives the print extra depth.
The print is permanently glued on an aluminium plate.
A board attached to the back of the photograph allows for a custom-made stick to run around it at a fixed distance, creating a gap between the print and the frame.
