Non contractual picture of the frame and beveledNon contractual picture of the frame
The reputation of Venice Beach is well established. It is even one of the most emblematic places in Los Angeles: blue cabin of lifeguards, huge attractions, white sand beach, a seaside atmosphere ... It is simply beautiful. Moreover, the author did not remain insensitive to the natural charm of the places since it was inspired to realize this photograph. Here, people, equipped with their equipment, rush towards the beach to enjoy a good swim.
The print is permanently glued to a 2-mm thick dibond plate.
Dibond is a composite material composed of a black polyethylene plate in between two plates of white glossed aluminum.
A 20-mm thick steel mount is glued to the back of the photograph. This system allows for great rigidity and a hanging slightly away from the wall.
The print is permanently glued to a 1-mm thick aluminium plate. A 3-mm transparent glossy plexiglas plate is added in front of the photograph.
A 20-mm thick steel mount is glued to the back of the photograph. This system allows for great rigidity and a hanging slightly away from the wall.
Plexiglas increases contrast and colors and gives the print extra depth.
The print is permanently glued on an aluminium plate.
A board attached to the back of the photograph allows for a custom-made stick to run around it at a fixed distance, creating a gap between the print and the frame.
The print is permanently glued to a 2-mm thick dibond plate.
Dibond is a composite material composed of a black polyethylene plate in between two plates of white glossed aluminum.
A 20-mm thick steel mount is glued to the back of the photograph. This system allows for great rigidity and a hanging slightly away from the wall.
The print is permanently glued to a 1-mm thick aluminium plate. A 3-mm transparent glossy plexiglas plate is added in front of the photograph.
A 20-mm thick steel mount is glued to the back of the photograph. This system allows for great rigidity and a hanging slightly away from the wall.
Plexiglas increases contrast and colors and gives the print extra depth.
The print is permanently glued on an aluminium plate.
A board attached to the back of the photograph allows for a custom-made stick to run around it at a fixed distance, creating a gap between the print and the frame.